The biggest enemy of the good is the better – according to this philosophy, right from the outset the Hydropower b120k system consisted of only the best in terms of ease of use, safety, design and material quality: All components are manufactured and assembled with the utmost care and precision, exclusively in Switzerland. Result: The most innovative, best, most convenient, finest and most efficient On Board Deck Cleaning System in the world!
The high pressure section of the cleaning unit/units has an electronically controlled bypass valve for convenient, fast connection and disconnection of the cleaning lance high-pressure hose to each chosen control panel, which releases the pressure in the system within two seconds of switching from the ON to OFF mode and channels excess water back into the inlet section.
How many control panels and how many high-pressure cleaning units you need, depends on the size of your yacht/boat (the maximum length of the high-pressure line/s between the cleaning unit and the control panel(s) is 10 metres). Installation with a ring main is also no problem. You are spoilt for choice.
The pump requires a 230 volt power supply. We have parts and converters available to create simple safe electrical connections, when necessary.
Pressure, infinitely adjustable: 10 - 120 bar
Permissible operating pressure: 135 bar
Dimensions in mm (L x W x H): 550 x 300 x 300
Steel fabric high-pressure hose blue, 10 m
Electrical connection: 230 V / 11.0 A/50 Hz
Connected load consumption: P 1 - 2.5 kW
Power consumption tax: P 2 - 1.8 kW
Inrush Control Panel: 12 V
Water rate: 10 l / min
Water inlet temperature: up to 60 ° C
Suction height: 2 m
Engine speed: 2,800 r / min
Weight: about 27 kg
IP 55 protection
Notice: All listed products and specifications are subject to change without prior notice.
